SawStop PCS175 is a very essential workshop tool in the wood work industry. This is because they make work much easier thus lessen fatigue and delivers quality products.
It delivers convenience as it works optimally with 110 volts making it very expedient for hobbyists or people that work from home as you do not need special plugging. The table saw is therefore very opportune for hobbyists, experts and learners.
SawStop PCS175 Table Saw Review/ 5 Major Features
1. Safety
When it comes to working with table saw, safety is key. This is because the risk of being injured or even amputated is heightened.
As a matter of fact, research has it that when using a table saw, there is an injury every 0.15hrs (9 minutes) And approximately 10 amputations in a day. This number is even higher when using a table saw that is not safe.
Stopping a table saw when a person is about to be injured is almost impossible. This is because of the action time required.
SawStop PCS175 however has a safety system that is able to brake the blades in a span of less than 0.003s (3 milliseconds) When human hand or finger is detected.
When one accidentally touches the blade, an electric signal is induced onto the blade and then monitors that signal for alteration. After this a swift brake stops the blade immediately by pushing the brake pawl thus stops the blades from spinning.
2. Proficient T-Glide Fence
SawStop PCS175 has a T-glide fence system that is unquestionably smooth. This premium quality system has thick steel gauge which offers a larger working surface.
Additionally, it delivers smooth operation which to a great percentage reduce the risk of accidents. This also ensures guaranteed lockdown which implies that you will no longer has to deal with deflection issues.
It also has a riving knife. This is a very essential tool as it not only offers protection but also minimizes kickback.
3. Dust collection
While cancer is on the rise, researchers have committed to finding out carcinogens in an attempt to reduce the cases.
The Centre for Disease Control (CDC) recently classified saw dust as a cancer causing agent. This implies that long exposure to it hazardous to human health.
In this elegant table saw however, dust is collected up to 99%. Below the table, there is a shroud. This helps deal with the turbulent air below where it puts the dust into a well-designed port that is about 0.102m (4 inches) at the back of the saw.
This is further complemented by a blade that clears dust at the top of the table. The expertly designed blades collects even the very tiny saw dust particles thus ensuring safety. It allows for use by all people including those who are asthmatic.
Note: the dust collection blades in SawStop PCS175 is sold separately.
4. Durability
Table Saws are quite expensive. As a result, purchasing one that will not last long can be very frustrating. The durability of SawStop PCS175 goes unquestioned.
It has durable poly V-ripped belts. This ensures undisputable power transfer. It also lessens vibration ensuring that they last long.
The sturdy construction have a trunnion with exceptionally thick arbores. It is versatile and convenient as it works with any 0.254m (10inch) saw. The trunnion is substantial ensuring that the table saw serves you for as long as you need it.
The cast iron table also heavy-duty and has extension wings. The open gearing is resilient which adds onto its durability.
Note: although the table saw is very durable, it should not be used to cut wood exceeding 0.079m (3.125 inches)
5. Portable and ergonomic
This unit is highly portable which is actually a plus. It has an expert mobile base that has two wheels. It has casters which are 3600 casters.
To add on to this, the machine is ergonomic, featuring one foot operation which allows you lift the table saw perfunctorily in one motion. It has quick pumps which helps in raising the saw thus making it very easy to operate.
Wood work is always associated with noise. In fact, the first thing that comes to mind when work shop is mentioned is a noisy environment.
The table saw is actually the main contributor of noise through the belts. However, this ergonomic design has ribbed belts that are indisputable and quiet. In addition to this, it has open gearing that is very easy to operate.
Why should you use SawStop PCS175 Table Saw?
1. Impressive Design
This model might be the best because of its impressive design. The design is satisfactory and extremely designed with everything within the reach, safe and also trustworthy.
It has precise and neat measuring instruments. It is fully enclosed and well known for great dust management.
2. Quality performance
This table saw is actually more than effective in terms of performance. It has many choices of blades to choose from. These blades normally range from 1.75 HP and 3 HP. You can easily plug your table saw anywhere and start your operation.
3. Safety features
Majority of users prefer this table saw considering its many safety features. It has sensors that will automatically sense any part of the body that may touch the blade.
It will know and an electronic signal will be sent to keep you safe by stopping the blade from running.
4. Strong built
In addition to its powerful performance, the table saw is durable and sturdy. It is strongly built. Made of strong materials that lasts for long and ensures that the unit is stable all the time.
5. Easy to use
The moment you assemble this table saw, using it is very easy. It cuts smoothly and very fast. Start/stop function is easy to use. All others functions are direct to understand. You can easily operate every function with a lot of easiness.
Product Benefits
- Easy to assemble and use
- It is portable and durable
- Reliable and versatile
- Impressive design
- Safety features
- Great accuracy
- High quality performance
- Extremely efficient
The Negative Things
- Not good for hobbyists
- Requires assembly
FAQ – Frequently Asked Questions
- What is the height of this table saw?
It is about 34 inches
- Is the cast iron a one piece?
Yes it is a single piece
- What is the maximum thickness of the wood this machine can cut?
It can cut up to 2 3/4 inches
- Can it work without the cartridge inserted?
No it won’t work
- Can you put 52 inch fence around this saw?
Yes it is possible
Final Verdict
From the foregoing discussion, it is evident that the machine is very consistent and efficient.
Essentially, while most table saw require much expertise to operate, this solid construction is much easier to operate as compared to other constructions in market today.
It is also very safe and has to a great extent reduced the number of accidents.
SawStop PCS175 however works best with wood of thickness 0.079m (3.125 inches) and below. This is a factor that should therefore be strongly considered before purchase.
The maintenance of this elegant machine is very low. To crown it all, it has a one year limited warranty which is a guarantee of quality.